Digital II: Modeling & Fabrication

Digital II: Modeling & Fabrication

Course Modules

14 Photo Documentation April 25

14 Photo Documentation April 25
Module Completed Module In Progress Module Locked
14 Photo Documentation April 25 4613  
  • Page
    14.00 Introduction 14.00 Introduction
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    14.01 Basic Camera Settings 14.01 Basic Camera Settings
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    14.02 Photographing 3D Artwork 14.02 Photographing 3D Artwork
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    14.03 think[box] Photo Documentation Instructions 14.03 think[box] Photo Documentation Instructions
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    14.04 Final CNC and 3D Print Documentation Assignment 14.04 Final CNC and 3D Print Documentation Assignment
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete

13 CNC Fabrication April 18

13 CNC Fabrication April 18
Module Completed Module In Progress Module Locked
13 CNC Fabrication April 18 3599  
  • Page
    13.00 Introduction 13.00 Introduction
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    13.01 Create ShopBot Tool Fusion 360 13.01 Create ShopBot Tool Fusion 360
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    13.02 ShopBot Toolpath Fusion 360 13.02 ShopBot Toolpath Fusion 360
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    13.03 Securing Workpiece to ShopBot 13.03 Securing Workpiece to ShopBot
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    13.04 Create Toolpath CNC Project 13.04 Create Toolpath CNC Project
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    13.05 ShopBot Reservation 13.05 ShopBot Reservation
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    13.06 CNC and 3D Print Project Fabricated Assignment 13.06 CNC and 3D Print Project Fabricated Assignment
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete

12 CNC Design and Modeling

12 CNC Design and Modeling
Module Completed Module In Progress Module Locked
12 CNC Design and Modeling 3598  
  • Page
    12.00 Introduction 12.00 Introduction
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    12.01 Design Research 12.01 Design Research
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    12.02 CNC 3D Print Ideation Sketches Assignment 12.02 CNC 3D Print Ideation Sketches Assignment
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    12.03 CNC Fillets Fusion 360 12.03 CNC Fillets Fusion 360
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    12.05 3D Model of CNC Portion of 3D Print / CNC Project 12.05 3D Model of CNC Portion of 3D Print / CNC Project
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete

11 CNC

11 CNC
Module Completed Module In Progress Module Locked
11 CNC 3597  
  • Page
    11.00 Introduction 11.00 Introduction
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    11.01 CNC vs Laser Cutting 11.01 CNC vs Laser Cutting
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    11.02 Pocket Cuts and Joints 11.02 Pocket Cuts and Joints
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    11.03 Additional User Parameters 11.03 Additional User Parameters
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    11.04 Robust Parametric Models 11.04 Robust Parametric Models
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    11.05 CNC Tolerances and Fit 11.05 CNC Tolerances and Fit
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    11.06 Fusion 360 CNC Modeling 11.06 Fusion 360 CNC Modeling
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete

10 3D Printing

10 3D Printing
Module Completed Module In Progress Module Locked
10 3D Printing 3594  
  • Page
    10.00 Introduction 10.00 Introduction
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    10.01 3D Printing Terms 10.01 3D Printing Terms
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    6.02 3D Printing Design Guidelines 6.02 3D Printing Design Guidelines
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    10.03 3D Print Modeling in Fusion 360 10.03 3D Print Modeling in Fusion 360
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    10.04 Fusion 360 Check Bounding Box Size 10.04 Fusion 360 Check Bounding Box Size
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    10.05 Export STL Fusion 360 10.05 Export STL Fusion 360
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    10.06 Export STL Blender 10.06 Export STL Blender
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    10.07 Export STL Maya 10.07 Export STL Maya
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    10.08 Ultimaker 2+ think[box] Tutorial 10.08 Ultimaker 2+ think[box] Tutorial
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    10.09 Advanced 3D Printer Settings think[box] 10.09 Advanced 3D Printer Settings think[box]
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    10.10 Export STL File for 3D Test Print 10.10 Export STL File for 3D Test Print
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    10.12 Upload Sliced G-code from Cura 10.12 Upload Sliced G-code from Cura
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    10.13 Animation Progress Upload 10.13 Animation Progress Upload
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete

09 3D Animation Narrative

09 3D Animation Narrative
Module Completed Module In Progress Module Locked
09 3D Animation Narrative 4553  
  • Page
    09.00 Introduction 09.00 Introduction
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    09.01 Narrative Arc 09.01 Narrative Arc
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    09.02 Shot Types 09.02 Shot Types
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    09.03 Storyboards 09.03 Storyboards
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    09.07 3D Test Print Object Model Assignment 09.07 3D Test Print Object Model Assignment
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    09.08 3D Animation Environment Building 09.08 3D Animation Environment Building
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    09.09 3D Animation Project 09.09 3D Animation Project
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete

08 3D Animation Introduction

08 3D Animation Introduction
Module Completed Module In Progress Module Locked
08 3D Animation Introduction 3602  
  • Page
    08.00 Introduction 08.00 Introduction
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    08.01 Animation 08.01 Animation
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    08.02 Keyframes 08.02 Keyframes
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    08.03 Maya 3D Animation 08.03 Maya 3D Animation
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    08.04 Blender 3D Animation 08.04 Blender 3D Animation
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    08.05 Import Animation Image Sequence 08.05 Import Animation Image Sequence
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    08.06 Add Music and Sound 08.06 Add Music and Sound
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete

07 Polygon Texturing and Materials

07 Polygon Texturing and Materials
Module Completed Module In Progress Module Locked
07 Polygon Texturing and Materials 3601  
  • Page
    07.00 Introduction 07.00 Introduction
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    07.01 UV Coordinates 07.01 UV Coordinates
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    07.03 Blender Texture Paint 07.03 Blender Texture Paint
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    07.04 Maya 3D Paint 07.04 Maya 3D Paint
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    07.05 Blender Principled BSDF 07.05 Blender Principled BSDF
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    07.06 Maya aiStandard Surface 07.06 Maya aiStandard Surface
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    07.07 Blender UV Mapping 07.07 Blender UV Mapping
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    07.08 Maya UV Mapping 07.08 Maya UV Mapping
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    07.09 Create Seamless Textures 07.09 Create Seamless Textures
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    07.10 Texturing and Rendering In Class Exercise 07.10 Texturing and Rendering In Class Exercise
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    07.11 Model a scene with multiple objects in Maya OR Blender 07.11 Model a scene with multiple objects in Maya OR Blender
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete

06; Polygon 3D Modeling

06; Polygon 3D Modeling
Module Completed Module In Progress Module Locked
06; Polygon 3D Modeling 3600  
  • Page
    06.00 Introduction 06.00 Introduction
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    06.01 Laser Cut Self Assessment 06.01 Laser Cut Self Assessment
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    06.02 Polygon 3D Modeling Overview 06.02 Polygon 3D Modeling Overview
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    06.03 Blender 3D Modeling Basics 06.03 Blender 3D Modeling Basics
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    06.04 Maya 3D Modeling Basics 06.04 Maya 3D Modeling Basics
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    06.05 Fusion 360 T-Spline Modeling 06.05 Fusion 360 T-Spline Modeling
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    06.06 Blender Add Materials 06.06 Blender Add Materials
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    06.07 Maya Add Materials 06.07 Maya Add Materials
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    06.08 Blender Rendering Basics 06.08 Blender Rendering Basics
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    06.09 Maya Rendering Basics 06.09 Maya Rendering Basics
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    06.10 Polygon Modeling Render Exercises Assignment 06.10 Polygon Modeling Render Exercises Assignment
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    06.11 Laser Cut Photo Documentation Assignment 06.11 Laser Cut Photo Documentation Assignment
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete

05 Laser Cutting Fabrication

05 Laser Cutting Fabrication
Module Completed Module In Progress Module Locked
05 Laser Cutting Fabrication 3593  
  • Page
    05.00 Laser Cutting Fabrication Introduction 05.00 Laser Cutting Fabrication Introduction
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Discussion Topic
    05.01 Laser Cut Fusion Model Self Evaluation 05.01 Laser Cut Fusion Model Self Evaluation
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    05.02 Laser Cutting 3D Model Revisions 05.02 Laser Cutting 3D Model Revisions
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    05.03 Create Laser Cutting Tool 05.03 Create Laser Cutting Tool
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    05.04 Install DXF Post Processor 05.04 Install DXF Post Processor
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    05.05 Make a Manufacture Model Copy 05.05 Make a Manufacture Model Copy
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    05.06 Lay Parts Flat for Laser Cutting 05.06 Lay Parts Flat for Laser Cutting
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    05.07 Export Laser Cut Toolpaths to DXF 05.07 Export Laser Cut Toolpaths to DXF
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    5.07 Prepare DXF File for Laser Cutting 5.07 Prepare DXF File for Laser Cutting
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    05.09 Cut Out and Assemble Laser Cut Project 05.09 Cut Out and Assemble Laser Cut Project
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete

04 Laser Cutting 3D Modeling

04 Laser Cutting 3D Modeling
Module Completed Module In Progress Module Locked
04 Laser Cutting 3D Modeling 3592  
  • Page
    4.00 Introduction Laser Cutting 3D Modeling 4.00 Introduction Laser Cutting 3D Modeling
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    4.01 Fusion 360 User Parameter Basics 4.01 Fusion 360 User Parameter Basics
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    4.02 Import Sketches or Designs Fusion 360 4.02 Import Sketches or Designs Fusion 360
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    4.03 Fix Design History Timeline Errors Fusion 360 4.03 Fix Design History Timeline Errors Fusion 360
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    4.04 Laser Cut Joint Examples 4.04 Laser Cut Joint Examples
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    4.05 Laser Cutting Living Hinge Modeling 4.05 Laser Cutting Living Hinge Modeling
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    4.06 Multi Component Example Models for Laser Cutting 4.06 Multi Component Example Models for Laser Cutting
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    4.07 Model Laser Cut Project in Fusion 360 4.07 Model Laser Cut Project in Fusion 360
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete

03 Laser Cutting Introduction

03 Laser Cutting Introduction
Module Completed Module In Progress Module Locked
03 Laser Cutting Introduction 3591  
  • Page
    03.00 Laser Cutting Introduction 03.00 Laser Cutting Introduction
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    03.01 Laser Cutting 03.01 Laser Cutting
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    03.02 Laser Cut File Generators 03.02 Laser Cut File Generators
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    03.03 think[box] Laser Cut File Prep 03.03 think[box] Laser Cut File Prep
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    03.04 think[box] Laser Cutter Instructions 03.04 think[box] Laser Cutter Instructions
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    03.05 Ideation Sketching 03.05 Ideation Sketching
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    03.06 Cardboard Construction 03.06 Cardboard Construction
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    03.07 Laser Cut Design Research 03.07 Laser Cut Design Research
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    03.08 Laser Cut Ideation Sketches 03.08 Laser Cut Ideation Sketches
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    03.09 Laser Cut Cardboard Models 03.09 Laser Cut Cardboard Models
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete

02 Fusion 360 Sketching and 3D Modeling Basics

02 Fusion 360 Sketching and 3D Modeling Basics
Module Completed Module In Progress Module Locked
02 Fusion 360 Sketching and 3D Modeling Basics 3590  
  • Page
    02.00 Introduction Modeling Basics 02.00 Introduction Modeling Basics
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    02.01 Basic Creation Tools in Fusion 360 02.01 Basic Creation Tools in Fusion 360
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    02.02 Basic Pattern Tools Fusion 360 02.02 Basic Pattern Tools Fusion 360
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    02.03 Fusion 360 Sketch Constraints 02.03 Fusion 360 Sketch Constraints
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    02.04 Fusion 360 Rule Number 1 02.04 Fusion 360 Rule Number 1
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    02.05 Basic Rendering in Fusion 360 02.05 Basic Rendering in Fusion 360
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    02.06 Export .f3d file from Fusion 360 02.06 Export .f3d file from Fusion 360
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    02.07 Model Example Objects from Sketches and Export Render Fusion 360 02.07 Model Example Objects from Sketches and Export Render Fusion 360
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    02.08 Model New Objects and Export Render Fusion 360 02.08 Model New Objects and Export Render Fusion 360
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete

01 Technical Sketching and Fusion 360

01 Technical Sketching and Fusion 360
Module Completed Module In Progress Module Locked
01 Technical Sketching and Fusion 360 3589  
  • Page
    01.00 Introduction to Technical Sketching and Fusion 360 01.00 Introduction to Technical Sketching and Fusion 360
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    01.01 Technical Sketching 01.01 Technical Sketching
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    01.02 Technical Sketching Practice Exercises 01.02 Technical Sketching Practice Exercises
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    01.03 Third Angle Projections 01.03 Third Angle Projections
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    01.04 Draw Two Objects in Third Angle Projection Assignment 01.04 Draw Two Objects in Third Angle Projection Assignment
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    01.05 Fusion 360 Introduction 01.05 Fusion 360 Introduction
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Assignment
    01.06 Fusion 360 3D Modeling Exercise Exported Render Assignment 01.06 Fusion 360 3D Modeling Exercise Exported Render Assignment
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete

00 Getting Started

00 Getting Started
Module Completed Module In Progress Module Locked
00 Getting Started 3588  
  • Page
    00.00 Course Introduction 00.00 Course Introduction
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    00.01 Syllabus 00.01 Syllabus
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    00.02 How to Succeed in This Course 00.02 How to Succeed in This Course
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    00.03 Course Links 00.03 Course Links
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
  • Page
    00.04 Fusion 360 FAQ 00.04 Fusion 360 FAQ
    Score at least   Must score at least   to complete this module item Scored at least   Module item has been completed by scoring at least   View Must view in order to complete this module item Viewed Module item has been viewed and is complete Mark done Must mark this module item done in order to complete Marked done Module item marked as done and is complete Contribute Must contribute to this module item to complete it Contributed Contributed to this module item and is complete Submit Must submit this module item to complete it Submitted Module item submitted and is complete
 
minimum score must view must submit must contribute